Track systems
Five Track Lighting Systems, Specified as One Package
Each system is a complete set: rail, adapters, connectors, power feeders, end caps and luminaires. The low-voltage magnetic systems differ from the wire systems by how the light is mounted and powered; the wire systems differ by circuit structure — that is what determines how much control you have over one run.
24V Magnetic
DC24V, 5 mm ultra-narrow rail. The most discreet magnetic system for detail-rich spaces.
Explore ›
48V Magnetic
DC48V, 20 mm reference rail with the widest module range.
Explore ›
2-Wire (1-Phase)
Single circuit — one switch and dimming group for the whole run.
Explore ›
4-Wire (3-Phase)
Three circuits on one run — grouped control without rewiring.
Explore ›
6-Wire (3-Phase)
Extra circuits and a DALI control channel for scene control.
Explore ›What a complete system includes
Track rail
The profile that carries power and holds the luminaires. Surface, recessed or suspended.
Adapters
The interface between rail and luminaire. Must match both sides.
Connectors
Straight, L, T and flexible joins that let a layout turn corners.
Power feeders
Where mains or driver output enters the run, including end and centre feed.
End caps
Closing the rail safely and cleanly at the end of a run.
Luminaires
Spotlights, linear modules and wall washers from the LUXERA range.
The four systems at a glance
| System | Supply | Circuit structure | Typical use | Mounting |
|---|---|---|---|---|
| 24V Magnetic | DC24V safety voltage | Magnetic modules, repositionable | Residential, retail, galleries, hospitality | Surface, recessed, suspended |
| 48V Magnetic | DC48V system, DC36V module | Magnetic modules, repositionable | Retail, residential, galleries, hotels | Surface, recessed, suspended |
| 2-Wire | Mains voltage | Single circuit | Small shops, single-zone areas, residential | Surface, suspended |
| 4-Wire | Mains voltage | 4-wire, three phase — three circuits on one run | Retail, showrooms, hotel public areas | Surface, recessed, suspended |
| 6-Wire (3-Phase) | Mains voltage | 6-wire, three phase — additional circuits or control channel per model | Large retail, galleries, scene-controlled spaces | Surface, recessed, suspended |
How to choose
- Start with the space, not the product. How many zones need to be controlled separately? One zone points to 2-wire; three zones on one run points to 4-wire.
- Then decide the mounting. A visible ceiling suits surface track; a clean plaster ceiling suits recessed; a high or open ceiling suits suspended.
- Then choose the luminaires. Beam angle and colour rendering matter more than wattage. See the product range.
- Then tell us the control method. Phase, 0–10 V, DALI or wireless — we confirm what the selected models support.
If you are unsure, send us the space and the requirement. Choosing the system is our job, not yours.
Next step
Not sure which system fits?
Describe the space and how you want to control it. We will tell you which of the four systems we recommend and why.
Drawings and site photos can follow by WhatsApp or email. No upload needed to start.
Quick enquiry
Five fields. We reply within one business day.